Set-Up on a Wireless Network
To assign a specific IP address to a robot, you will need to use a DHCP reservation connected to the robot's MAC address. To facilitate this, the MAC address for each robot is available under Utilities > Network > Network info > Wireless.
Using an Ethernet Connection?
If you are wishing to connect via Ethernet instead of WiFi, then the robot's MAC address can be found using Utilities > Network > Network info.
Having trouble?
Another approach would be to use a separate WiFi SSID with it’s own network subnet specifically for robots so that the robot(s) can be managed separately by IP subnet instead of by individual address.
Need assistance setting up your DHCP reservation?
Check out this video explaining this setup in Windows Server 2016.